The basic aerosol can of today has not really changed since the 1920’s. It is a metal can in which two fluids are sealed. One fluid is the product that is to be dispensed and the other is the propellant. The propellant is a compressed gas that expands when the aerosol can is opened (generally by pushing a button or pulling a lever). The propellant forces the product through a tube in the can and out the nozzle. Many different products are dispensed in aerosol cans, from shaving cream to cooking spray or room fresheners. Although the cans these products come in may look different, the mechanism behind them is the same.
Due to regulations concerning Chlorofluorocarbons (CFCs) and Hydrochlorofluorocarbons (HCFCs) most aerosol cans today use a hydrocarbon propellant. While this type of propellant is less harmful to the ozone layer than CFCs and HCFCs were it is highly flammable.
If an aerosol can held a substance that is regulated as hazardous it must “drained or emptied to less than 3% by weight of the total capacity of the container (40 CFR 261.7)” or it is considered a hazardous waste.
That said, even aerosol cans that have been drained to less than 3% will likely still contain propellant (which can be reactive when combined with an igniting force) and as such will still be considered hazardous. So, unless a can is fully emptied of propellant it is still considered a hazardous waste and should be disposed of accordingly.
For a business, an aerosol can that has been both punctured and drained of its contents would meet the definition of scrap metal (40 CFR 261.1) and can be recycled. Regulations for puncturing change though and need to be checked on both a national and state level. If not punctured and recycled, a hazardous waste determination must be made and the can(s) must be disposed of appropriately.
For an individual or home, RCRA does not regulate how you dispose of your aerosol cans. If you would like to do the best/most environmentally friendly thing though you could take your old aerosol cans to a local household hazardous waste collection.
And remember, this post is meant to provide general information about managing aerosol cans. It is always important to consult the actual state and federal statutes and regulations before making any decisions that may impact regulatory compliance.
VP of Health and Safety Jim Mangas discusses the importance of plant safety, maintenance, and reliability (featured in BIC Magazine July/Aug '22)
Highlighting some of the wonderful interns we have at Heritage this year!
In this blog we walk you through the process of fuel blending, where we can turn hazardous waste materials into a viable alternative fuel source.
Our 12th annual Habitat for Humanity Build
On August 28th, 2021, the Louisiana coast was battered by Hurricane Ida. This included our Port Fourchon Service Center, where the devastating hurrica
Heritage Thermal Services is pleased to announce that its collection of household hazardous wastes for the East Liverpool area returns for 2022.
VP of Health and Safety Jim Mangas discusses preparedness for unexpected conditions during a project. (featured in BIC Magazine March/April '22)
Rachel McGrogan speaks about her time as a Lab Chemist at Heritage.